GRAPAR 32-3K pārtikas kravu pārvadāšanas cisterna

Chassis steel manufacturer KÖGEL KTL (anti-corrosion protection nanoceramics KTL).
Frame color: black powder coated RAL 9005
Mechanical saddle supports (product of Kögel's choice) with leveling foot, lifting
load 24 t. Operation from one side in the direction of travel on the right
2 x locking wedges with holders
Side protection device according to ECE-R73 with aluminum profiles including plastic covers
Rigid rear underrun protection according to ECE-R58
Wiring and brake system: WABCO ABS/EBS 2 x 7, 1 x 15 pole socket,
Trailer lighting according to EU standards
Control panel WABCO Smart Board; enables indication and control of WABCO EBS-E functions.
Mounted in the area of ​​the brake/air suspension controls.
Three-axle aggregate SAF INTRADISC with disc brakes diameter 430 mm,
The depth of the joint is 120 mm. Air suspension with a stroke of 180 mm.
1 x automatic lifting axle, switch on the chassis, possibility of control from the tractor cab
6 x tires 385/65 R 22.5 160K TL MICHELIN X® LINE™ ENERGY™
6 x steel wheel discs 22.5 x 11.75, (ET 120)
1 x spare wheel holder. Without spare wheel.
Superstructure specification: pressurized food tank

Volume: 32,000 ltr
3 chambers: 12,500+6,000+13,500 ltr
Pressure tank for food, wall reinforcement for pressure force.
Operating pressure: 2.0 Bar, tested at 2.6 Bar
Tank made of stainless steel. food grade steel AISI 304, 1.4301 ( X5CrNi 18-10 )
Insulated according to the ATP V2A standard with certification (K=0.481 W/m2K),
Tank surface: Mikrolite fiberglass, front and rear white RAL: 9010:
CIP-Central washing, 2+1+2 showers with DN 50 connection in the back right
3 x thermometer (1 x per chamber) on the right
3 x upper pressure filling hatches DN 500, 6 wing nuts, in stainless steel boxes (domes)
3 x pressure and vacuum valves on the upper hatches
3 x insulated stainless steel boxes (domes for hatches)
3 x floor valve DN 100 with control from the upper platform
1 x outlet DN 100 raised to the rear stainless steel box
1 x end lever flap valve DN 100 in the rear stainless box above the bumper
1 x central outlet, end lever valve DN 100 led into the box above the bumper
1 x polyurethane central outlet insulation, protective tape
1 x insulation surface of the central outlet stainless steel sheet 0.6 mm

Upper service platform in aluminum with folding handrail - LEFT
1 x stainless steel box at the back for the outlet above the bumper 1020 x 500 x3 90 mm
1 x stainless steel compressor box 1200 x 500 x 700 mm
Additional rear LED reversing lights on the rear bumper
Reflective tape on the back forehead
1 x stainless steel tube for hose Ø150 mm, length 6 m,